Boilers
Comfortable, silent, draught-free warmth with the ability to regulate individual room temperatures; hydronic heating is clean, efficient and dust free. A commitment to the use of a natural renewable energy source that has been relied on since the beginning of time, gives the home owner and smaller commercial user, an affordable alternative for their central heating needs.
Boilers from the 15kw, incorporated in the Gourmet Cooker, the 20kw Linea, that disguises itself as a standard wood heater, the clever Sophel glass fronted model that converts to an open fire and can be double-sided through to our dedicated Dynamic series of boilers up to 50kw output are all locally built by skilled tradesmen and distributed through our extensive network of dealers throughout Australia.
The Wise Living boilers are individually hand built by experienced craftsman, allowing them to design and manufacture specialised and customised products not possible with mass production methods.
Wise Living can therefore offer a specified heating requirement solution as individual as your needs.
All Wise Living heaters, cookers and boilers with hot water heating capability can be successfully combined with efficient, reliable, cost effective solar hot water Flat Panel or Evacuated Tube systems to provide domestic hot water.
Dynamic 2500
Compact and economical, the Dynamic 2500 dedicated hydronic boiler is the smallest boiler in the Dynamic Series range and when installed has a hydronic heat output of up to 25kwh. It is highly compact and competitively priced with optimum results obtained by frequent refueling. This unit can also be installed in a laundry or wet change area, turning it into a perfect drying room heater.
Hydronic Heat Output: 25kwh
Radiant Heat: Not applicable - boiler only
Dimensions:
Height 850mm
Width 400mm
Depth 680mm
Belvedere 5000
The largest in our hydronic boiler range, the Belvedere 5000 is primarily designed for plant room installation, providing up to 50kw of heat. The Belvedere features a large symmetrical firebox which gives high output temperatures while extending the burn time between refuelling.
The Belvedere 5000 is often the best choice for infloor slab heating as its high output, spacious firebox and high capacity water jacket enables the initial temperature rise required for in-slab heating. It also has both manual and automatic airflow control, self-closing draught diverter, and temperature sensor grate and self-scooping ash pan with a separate firebox and ash pan doors, and separate damper and air controls - automatic and manual. The Belvedere 5000 utilises a standard 150mm (6") flue assembly.
All Dynamic Boilers contain mild steel waterways and require the addition of a water conditioner. We recommend the addition of "Thermablend" long life boiler conditioner and corrosion inhibitor to maintain the system in optimum working condition. If connecting a Dynamic Boiler to a domestic hot water service, a heat exchange tank system must be used.
The Belvedere 5000 can also be installed in a living room and a glass door option is available.
Hydronic Heat Output: 50 kwh
Radiant Heat: Not applicable - boiler only
Dimensions:
Height 1200mm
Width 585mm
Depth 710mm
The Christo and Sophel
The Christo Hot Water can not only provide your family with the stunning warmth of a wood fire but can provide you with your hot water as well! The unit can be factory fitted with a stainless steel 5kw hot water jacket to supply domestic hot water or an 8kw stainless steel hot water jacket for domestic hot water and a towel rail in the bathroom or small hydronic radiator.
The Sophel hydronic boiler is designed to provide rich radiant slow combustion heat into the room in which it is installed while delivering gentle even warmth to each room in the home. The Sophel has a combined hydronic heat output of up to 45kwh. The large capacity firebox not only provides for generous heat output but also allows for extended burn times between refuelling. An ash tray system allows for easy and clean removal of ash even if the Sophel is in operation. Temperatures in each area of the home can be individually regulated and doors can be closed for privacy as the heat source is within each room and heating is not reliant on air flow. Hydronic heating eliminates draughts and vastly reduces airborne dust which can be created by some fan driven ducted systems.